Click any frequency to hear it · the highlighted cell is A4 · Space replays the last note · values update the moment you change A4.
01 / Where the numbers come from
The formula behind every cell
No lookup table is embedded here. Every frequency on this page is calculated on load from one reference pitch and one rule, so you can check any number with a calculator.
n is the MIDI note number: middle C (C4) is 60, A4 is 69, and each semitone adds 1. Octave o and semitone s (C = 0 … B = 11) map to n = 12 × (o + 1) + s. One octave doubles the frequency because 212/12 = 2; one semitone multiplies it by the twelfth root of two, 21/12 ≈ 1.059463.
- Range
- C0 (16.35 Hz at A4 = 440) through B8 (7902.13 Hz): 9 octaves × 12 notes = 108 clickable frequencies.
- Reference
- A4 defaults to 440 Hz and accepts 400–500 Hz in 0.1 Hz steps. Changing it recalculates all 108 cells immediately.
- Spelling
- Sharps (C♯, D♯, F♯, G♯, A♯) or flats (D♭, E♭, G♭, A♭, B♭). They are two names for the same frequencies; the sound and the Hz do not change.
- Octave numbering
- Scientific pitch notation: middle C is C4. Some instruments call that note C3; the frequency is the same.
- Tone
- A sine tone or a six-partial piano-like tone, both synthesized with the Web Audio API. No audio files, no network requests.
A frequency is a fact; recognizing it by ear is a skill. When you want to test whether you can name the distance between two of these notes, ear training plays synthesized intervals and scores your answers. If you are tuning an instrument first, find the tempo of the track before you practise timing against it.
02 / Pitch accuracy, measured
Does the tone we play match the number we print?
A chart can print the right Hz and still play the wrong pitch if the synthesizer is sloppy. We render each note in octave 4 with the same sine voice the player uses, read its fundamental back out of the buffer, and publish the difference in cents.
12 notes · octave 4 · A4 = 440 Hz · 44,100 Hz × 26,460-sample buffer · measured in this browser.
How it was measured
- Target frequency
ftarget = A4 × 2(n − 69)/12, with A4 from the control above (default 440 Hz, a defined reference, not a measurement). - We synthesize a 0.6-second sine wave at
ftargetinto a 44,100-sample-per-second buffer, with a 20 ms attack and a 50 ms release. The steady middle 30%–70% is used for the estimate. - The fundamental is read back with normalized autocorrelation. A periodic signal also correlates near 1.0 at 2×, 3× and later periods, so the estimator takes the first local peak reaching 90% of the strongest peak, then refines it with parabolic interpolation between three samples.
- Measured frequency
fmeas = 44100 / refined lag; deviation in cents= 1200 × log₂(fmeas / ftarget). A negative number means the rendered tone is flat.
What this is not. It measures this page’s synthesis and estimator, not your hearing, your speakers or another site. The deviation column is printed to four decimals because the residual is only a few thousandths of a cent — the resolution of reading a frequency at 44.1 kHz, not a correction applied to the tone. A different browser or reference value will produce different last digits.
| Note | MIDI n | Target Hz | Measured Hz | Deviation (cents) |
|---|
03 / FAQ
Short answers
What is a note frequency chart?
It is a table mapping musical note names to their pitch in hertz. This one lets you click any value to hear it, which is useful when learning what a frequency sounds like.
What frequency is A4?
440 Hz by default, the modern concert-pitch standard. The control above lets you set A4 to anything from 400 to 500 Hz; the whole 12-tone scale follows that reference.
How do I convert a note to a frequency?
number the note with MIDI notation (A4 = 69), then calculate A4 × 2(n−69)/12. Middle C is n = 60, so at A4 = 440 it is 261.626 Hz.
Why do some charts call middle C C3?
Octave numbering conventions differ between acoustic and MIDI literature. This chart uses scientific pitch notation, where middle C is C4.
Are sharps and flats different frequencies?
No. C♯4 and D♭4 are the same key on a piano and the same 277.183 Hz. The toggle only changes the label.
Does this page need an internet connection?
No. The frequencies are calculated in JavaScript and the tones are synthesized in the browser. Nothing is uploaded, downloaded or stored.